dmesg - 2012-03-03 13:53
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-16-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 17:44:39 UTC 2012 (Ubuntu 3.0.0-16.28-generic 3.0.17)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7da0000 (usable)
[ 0.000000] BIOS-e820: 00000000d7da0000 - 00000000d7dd1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d7dd1000 - 00000000d7e00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d7e00000 - 00000000d7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000228000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-970A-D3/GA-970A-D3, BIOS F6 08/31/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x228000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000D0000000 mask FFFFF8000000 write-back
[ 0.000000] 4 base 0000D7E00000 mask FFFFFFE00000 uncachable
[ 0.000000] 5 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 6 base 000200000000 mask FFFFE0000000 write-back
[ 0.000000] 7 base 000220000000 mask FFFFF8000000 write-back
[ 0.000000] TOM2: 0000000228000000 aka 8832M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3328MB, range: 128MB, type WB
[ 0.000000] reg 4, base: 3454MB, range: 2MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 6, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 8704MB, range: 128MB, type WB
[ 0.000000] total RAM covered: 3454M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3454MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 3456MB, range: 128MB, type UC
[ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[ 0.000000] e820 update range: 00000000d7e00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xd7da0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4b10] f4b10
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000d7da0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00d7c00000 page 2M
[ 0.000000] 00d7c00000 - 00d7da0000 page 4k
[ 0.000000] kernel direct mapping tables up to d7da0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000228000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0228000000 page 2M
[ 0.000000] kernel direct mapping tables up to 228000000 @ d7d9e000-d7da0000
[ 0.000000] RAMDISK: 365ac000 - 372ce000
[ 0.000000] ACPI: RSDP 00000000000f6a30 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000d7dd1000 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000d7dd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000d7dd1100 07876 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000d7da0000 00040
[ 0.000000] ACPI: MSDM 00000000d7dd8a40 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000d7dd8ac0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000d7dd8b00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000d7dd8b80 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000d7dd8bf0 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000d7dd8980 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000d7dd8e00 06180 (v01 MATS RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000d7ddf000 01158 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000228000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000228000000
[ 0.000000] NODE_DATA [0000000227ffb000 - 0000000227ffffff]
[ 0.000000] [ffffea0000000000-ffffea00079fffff] PMD -> [ffff88021f600000-ffff8802267fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00228000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000d7da0
[ 0.000000] 0: 0x00100000 -> 0x00228000
[ 0.000000] On node 0 totalpages: 2096431
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 865752 pages, LIFO batch:31
[ 0.000000] Normal zone: 16576 pages used for memmap
[ 0.000000] Normal zone: 1195840 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d7da0000 - 00000000d7dd1000
[ 0.000000] PM: Registered nosave memory: 00000000d7dd1000 - 00000000d7e00000
[ 0.000000] PM: Registered nosave memory: 00000000d7e00000 - 00000000d7f00000
[ 0.000000] PM: Registered nosave memory: 00000000d7f00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880227c00000 s79616 r8192 d22784 u262144
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065514
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 6e8a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ cc000000
[ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000d0000000
[ 0.000000] Memory: 8107468k/9043968k available (6138k kernel code, 658244k absent, 278256k reserved, 6896k data, 988k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3322.063 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6644.12 BogoMIPS (lpj=13288252)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004029] Security Framework initialized
[ 0.004040] AppArmor: AppArmor initialized
[ 0.004041] Yama: becoming mindful.
[ 0.004868] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007041] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008340] Mount-cache hash table entries: 256
[ 0.008446] Initializing cgroup subsys cpuacct
[ 0.008450] Initializing cgroup subsys memory
[ 0.008457] Initializing cgroup subsys devices
[ 0.008459] Initializing cgroup subsys freezer
[ 0.008460] Initializing cgroup subsys net_cls
[ 0.008462] Initializing cgroup subsys blkio
[ 0.008467] Initializing cgroup subsys perf_event
[ 0.008489] tseg: 00d7f00000
[ 0.008490] CPU: Physical Processor ID: 0
[ 0.008491] CPU: Processor Core ID: 0
[ 0.008493] mce: CPU supports 7 MCE banks
[ 0.009883] ACPI: Core revision 20110413
[ 0.016022] ftrace: allocating 25737 entries in 101 pages
[ 0.020350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061169] CPU0: AMD FX(tm)-6100 Six-Core Processor stepping 02
[ 0.064003] Performance Events: AMD Family 15h PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 6
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000003f
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152099] #2
[ 0.152102] smpboot cpu 2: start_ip = 9a000
[ 0.244071] #3
[ 0.244072] smpboot cpu 3: start_ip = 9a000
[ 0.336072] #4
[ 0.336073] smpboot cpu 4: start_ip = 9a000
[ 0.428088] #5
[ 0.428090] smpboot cpu 5: start_ip = 9a000
[ 0.520036] Brought up 6 CPUs
[ 0.520039] Total of 6 processors activated (39886.92 BogoMIPS).
[ 0.524169] devtmpfs: initialized
[ 0.524179] PM: Registering ACPI NVS region at d7da0000 (200704 bytes)
[ 0.525374] print_constraints: dummy:
[ 0.525392] Time: 1:55:28 Date: 03/03/12
[ 0.525422] NET: Registered protocol family 16
[ 0.525430] Trying to unpack rootfs image as initramfs...
[ 0.525552] Extended Config Space enabled on 1 nodes
[ 0.525591] ACPI: bus type pci registered
[ 0.525649] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.525653] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.566561] PCI: Using configuration type 1 for base access
[ 0.567496] bio: create slab at 0
[ 0.568987] ACPI: EC: Look up EC in DSDT
[ 0.580196] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110413/tbutils-314)
[ 0.580374] ACPI: Interpreter enabled
[ 0.580377] ACPI: (supports S0 S1 S4 S5)
[ 0.580398] ACPI: Using IOAPIC for interrupt routing
[ 0.743453] ACPI: No dock devices found.
[ 0.743456] HEST: Table not found.
[ 0.743460] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.743545] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.743708] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.743712] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.743715] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.743718] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.743721] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.743724] pci_root PNP0A03:00: host bridge window [mem 0xd8000000-0xfebfffff]
[ 0.743743] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
[ 0.743758] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.743807] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
[ 0.743849] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.743853] pci 0000:00:02.0: PME# disabled
[ 0.743870] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
[ 0.743900] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.743903] pci 0000:00:04.0: PME# disabled
[ 0.743923] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
[ 0.743953] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.743956] pci 0000:00:09.0: PME# disabled
[ 0.743983] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.744000] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.744009] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.744019] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.744028] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.744037] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.744051] pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
[ 0.744069] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.744102] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.744114] pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
[ 0.744187] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.744204] pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
[ 0.744263] pci 0000:00:12.2: supports D1 D2
[ 0.744265] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.744269] pci 0000:00:12.2: PME# disabled
[ 0.744292] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.744304] pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
[ 0.744364] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.744381] pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
[ 0.744444] pci 0000:00:13.2: supports D1 D2
[ 0.744448] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.744454] pci 0000:00:13.2: PME# disabled
[ 0.744474] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.744535] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.744547] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.744557] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.744566] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.744575] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.744585] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.744616] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.744635] pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.744684] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.744688] pci 0000:00:14.2: PME# disabled
[ 0.744700] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.744767] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.744807] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.744821] pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
[ 0.744885] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.744933] pci 0000:00:15.0: supports D1 D2
[ 0.744951] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.744964] pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
[ 0.745023] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.745040] pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
[ 0.745098] pci 0000:00:16.2: supports D1 D2
[ 0.745100] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.745105] pci 0000:00:16.2: PME# disabled
[ 0.745128] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[ 0.745156] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[ 0.745175] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[ 0.745194] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[ 0.745217] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[ 0.745237] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[ 0.745297] pci 0000:01:00.0: [10de:0140] type 0 class 0x000300
[ 0.745307] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf7ffffff]
[ 0.745318] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.745329] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfaffffff 64bit]
[ 0.745343] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.745371] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.745380] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.745384] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.745390] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.745397] pci 0000:00:02.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.745441] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.745458] pci 0000:02:00.0: reg 10: [mem 0xfd7f8000-0xfd7fffff 64bit]
[ 0.745517] pci 0000:02:00.0: supports D1 D2
[ 0.745519] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.745524] pci 0000:02:00.0: PME# disabled
[ 0.752062] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.752068] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.752072] pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.752079] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.752125] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.752143] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 0.752165] pci 0000:03:00.0: reg 18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
[ 0.752180] pci 0000:03:00.0: reg 20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
[ 0.752225] pci 0000:03:00.0: supports D1 D2
[ 0.752227] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.752232] pci 0000:03:00.0: PME# disabled
[ 0.760061] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[ 0.760066] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.760070] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.760075] pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.760111] pci 0000:04:06.0: [1131:7133] type 0 class 0x000480
[ 0.760136] pci 0000:04:06.0: reg 10: [mem 0xfddff000-0xfddff7ff]
[ 0.760218] pci 0000:04:06.0: supports D1 D2
[ 0.760261] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.760266] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.760270] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.760275] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.760279] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.760282] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.760285] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.760288] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.760292] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.760295] pci 0000:00:14.4: bridge window [mem 0xd8000000-0xfebfffff] (subtractive decode)
[ 0.760338] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.760344] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.760348] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.760354] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.760379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.760845] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.760906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.760976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.761033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.761086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.761139] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.761142] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.761145] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.771057] Freeing initrd memory: 13448k freed
[ 0.777780] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 0.777830] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 0.777877] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 0.777922] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 0.777967] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 0.778011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 0.778054] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 0.778098] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 0.778210] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.778214] vgaarb: loaded
[ 0.778216] vgaarb: bridge control possible 0000:01:00.0
[ 0.778401] SCSI subsystem initialized
[ 0.778416] libata version 3.00 loaded.
[ 0.778416] usbcore: registered new interface driver usbfs
[ 0.778416] usbcore: registered new interface driver hub
[ 0.778416] usbcore: registered new device driver usb
[ 0.778416] PCI: Using ACPI for IRQ routing
[ 0.785188] PCI: pci_cache_line_size set to 64 bytes
[ 0.785197] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.785273] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.785275] reserve RAM buffer: 00000000d7da0000 - 00000000d7ffffff
[ 0.785352] NetLabel: Initializing
[ 0.785354] NetLabel: domain hash size = 128
[ 0.785355] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.785367] NetLabel: unlabeled traffic allowed by default
[ 0.785401] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.785404] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.787444] Switching to clocksource hpet
[ 0.787473] Switched to NOHz mode on CPU #0
[ 0.787455] Switched to NOHz mode on CPU #4
[ 0.787460] Switched to NOHz mode on CPU #5
[ 0.787449] Switched to NOHz mode on CPU #2
[ 0.787448] Switched to NOHz mode on CPU #1
[ 0.787454] Switched to NOHz mode on CPU #3
[ 0.789655] AppArmor: AppArmor Filesystem Enabled
[ 0.789669] pnp: PnP ACPI init
[ 0.789679] ACPI: bus type pnp registered
[ 0.789760] pnp 00:00: [bus 00-ff]
[ 0.789762] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.789764] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.789766] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.789768] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.789770] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.789772] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.789775] pnp 00:00: [mem 0xd8000000-0xfebfffff window]
[ 0.789813] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.789824] pnp 00:01: [io 0x0010-0x001f]
[ 0.789826] pnp 00:01: [io 0x0022-0x003f]
[ 0.789827] pnp 00:01: [io 0x0044-0x004d]
[ 0.789831] pnp 00:01: [io 0x0050-0x005f]
[ 0.789833] pnp 00:01: [io 0x0062-0x0063]
[ 0.789834] pnp 00:01: [io 0x0065-0x006f]
[ 0.789836] pnp 00:01: [io 0x0074-0x007f]
[ 0.789838] pnp 00:01: [io 0x0091-0x0093]
[ 0.789839] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.789841] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.789843] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.789844] pnp 00:01: [io 0x0220-0x0225]
[ 0.789846] pnp 00:01: [io 0x0290-0x0294]
[ 0.789894] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.789896] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.789899] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.789902] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.790343] pnp 00:02: [io 0x0900-0x091f]
[ 0.790345] pnp 00:02: [io 0x0228-0x022f]
[ 0.790347] pnp 00:02: [io 0x040b]
[ 0.790349] pnp 00:02: [io 0x04d6]
[ 0.790350] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.790352] pnp 00:02: [io 0x0c14]
[ 0.790354] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.790355] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.790357] pnp 00:02: [io 0x0c6f]
[ 0.790359] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.790360] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.790362] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.790364] pnp 00:02: [io 0x0800-0x08fe]
[ 0.790365] pnp 00:02: [io 0x0a10-0x0a17]
[ 0.790367] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.790368] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.790370] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.790372] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.790374] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.790379] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.790408] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.790439] system 00:02: [io 0x0900-0x091f] has been reserved
[ 0.790442] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.790445] system 00:02: [io 0x040b] has been reserved
[ 0.790447] system 00:02: [io 0x04d6] has been reserved
[ 0.790449] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.790451] system 00:02: [io 0x0c14] has been reserved
[ 0.790454] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.790456] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.790458] system 00:02: [io 0x0c6f] has been reserved
[ 0.790460] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.790463] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.790465] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.790467] system 00:02: [io 0x0800-0x08fe] has been reserved
[ 0.790472] system 00:02: [io 0x0a10-0x0a17] has been reserved
[ 0.790475] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.790477] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.790479] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.790482] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.790485] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.790584] pnp 00:03: [dma 4]
[ 0.790586] pnp 00:03: [io 0x0000-0x000f]
[ 0.790588] pnp 00:03: [io 0x0080-0x0090]
[ 0.790590] pnp 00:03: [io 0x0094-0x009f]
[ 0.790591] pnp 00:03: [io 0x00c0-0x00df]
[ 0.790619] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.790676] pnp 00:04: [irq 0 disabled]
[ 0.790684] pnp 00:04: [irq 8]
[ 0.790686] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.790712] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.790742] pnp 00:05: [io 0x0070-0x0073]
[ 0.790768] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.790775] pnp 00:06: [io 0x0061]
[ 0.790803] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.790811] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.790815] pnp 00:07: [irq 13]
[ 0.790841] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.791134] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.791140] pnp 00:08: [irq 4]
[ 0.791192] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.791227] pnp 00:09: [io 0x0060]
[ 0.791229] pnp 00:09: [io 0x0064]
[ 0.791233] pnp 00:09: [irq 1]
[ 0.791267] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.791297] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.791345] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.791348] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.791512] pnp 00:0b: [mem 0x000cf200-0x000cffff]
[ 0.791515] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.791516] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.791518] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.791520] pnp 00:0b: [mem 0xd7da0000-0xd7dfffff]
[ 0.791522] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[ 0.791524] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.791525] pnp 00:0b: [mem 0x00100000-0xd7d9ffff]
[ 0.791527] pnp 00:0b: [mem 0xd7e00000-0xd7efffff]
[ 0.791529] pnp 00:0b: [mem 0xd7f00000-0xd7ffffff]
[ 0.791531] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.791532] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.791534] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
[ 0.791538] pnp 00:0b: disabling [mem 0x000cf200-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.791541] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.791545] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.791548] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.791551] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.791555] pnp 00:0b: disabling [mem 0x00100000-0xd7d9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.791615] system 00:0b: [mem 0xd7da0000-0xd7dfffff] could not be reserved
[ 0.791618] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.791621] system 00:0b: [mem 0xd7e00000-0xd7efffff] has been reserved
[ 0.791623] system 00:0b: [mem 0xd7f00000-0xd7ffffff] could not be reserved
[ 0.791626] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.791628] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.791631] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.791633] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.791654] pnp: PnP ACPI: found 12 devices
[ 0.791655] ACPI: ACPI bus type pnp unregistered
[ 0.797414] PCI: max bus depth: 1 pci_try_num: 2
[ 0.797437] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
[ 0.797440] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.797443] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.797446] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.797449] pci 0000:00:02.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.797453] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.797455] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.797458] pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.797461] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.797465] pci 0000:00:09.0: PCI bridge to [bus 03-03]
[ 0.797467] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 0.797470] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.797473] pci 0000:00:09.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.797477] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.797480] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.797484] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.797488] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.797493] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.797496] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 0.797500] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.797503] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.797516] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.797520] pci 0000:00:02.0: setting latency timer to 64
[ 0.797527] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.797530] pci 0000:00:04.0: setting latency timer to 64
[ 0.797537] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.797540] pci 0000:00:09.0: setting latency timer to 64
[ 0.797549] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.797552] pci 0000:00:15.0: setting latency timer to 64
[ 0.797556] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.797558] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.797560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.797562] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.797564] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.797566] pci_bus 0000:00: resource 9 [mem 0xd8000000-0xfebfffff]
[ 0.797568] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.797570] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xfbffffff]
[ 0.797573] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.797575] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.797577] pci_bus 0000:02: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.797579] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.797581] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.797583] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.797585] pci_bus 0000:03: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.797588] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.797590] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.797592] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.797594] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.797596] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.797598] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.797600] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.797602] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.797604] pci_bus 0000:04: resource 9 [mem 0xd8000000-0xfebfffff]
[ 0.797606] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.797608] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.797610] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.797637] NET: Registered protocol family 2
[ 0.797906] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.799289] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.801174] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.801386] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.801388] TCP reno registered
[ 0.801405] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.801449] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.801568] NET: Registered protocol family 1
[ 1.104119] pci 0000:01:00.0: Boot video device
[ 1.104183] PCI: CLS 64 bytes, default 64
[ 1.104576] PCI-DMA: Disabling AGP.
[ 1.104747] PCI-DMA: aperture base @ cc000000 size 65536 KB
[ 1.104751] PCI-DMA: using GART IOMMU.
[ 1.104757] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.114307] audit: initializing netlink socket (disabled)
[ 1.114324] type=2000 audit(1330739728.108:1): initialized
[ 1.172514] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.198861] VFS: Disk quotas dquot_6.5.2
[ 1.198916] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.199526] fuse init (API version 7.16)
[ 1.199603] msgmni has been set to 15989
[ 1.200028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.200061] io scheduler noop registered
[ 1.200063] io scheduler deadline registered
[ 1.200100] io scheduler cfq registered (default)
[ 1.200306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.200325] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.200417] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.200422] ACPI: Power Button [PWRB]
[ 1.200462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.200465] ACPI: Power Button [PWRF]
[ 1.200487] ACPI: acpi_idle registered with cpuidle
[ 1.366010] ERST: Table is not found!
[ 1.386537] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.410281] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.410768] Linux agpgart interface v0.103
[ 1.412813] brd: module loaded
[ 1.413781] loop: module loaded
[ 1.414053] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.414679] Fixed MDIO Bus: probed
[ 1.414723] PPP generic driver version 2.4.2
[ 1.414785] tun: Universal TUN/TAP device driver, 1.6
[ 1.414789] tun: (C) 1999-2004 Max Krasnyansky
[ 1.414934] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.414956] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.415002] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.415069] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.415084] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.415125] QUIRK: Enable AMD PLL fix
[ 1.415140] ehci_hcd 0000:00:12.2: debug port 1
[ 1.415172] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
[ 1.424035] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.424239] hub 1-0:1.0: USB hub found
[ 1.424247] hub 1-0:1.0: 5 ports detected
[ 1.424370] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.424392] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.424458] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.424469] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.424498] ehci_hcd 0000:00:13.2: debug port 1
[ 1.424515] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
[ 1.436033] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.436233] hub 2-0:1.0: USB hub found
[ 1.436241] hub 2-0:1.0: 5 ports detected
[ 1.436363] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.436386] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.436445] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.436456] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.436485] ehci_hcd 0000:00:16.2: debug port 1
[ 1.436505] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
[ 1.448032] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.448226] hub 3-0:1.0: USB hub found
[ 1.448234] hub 3-0:1.0: 4 ports detected
[ 1.448357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.448380] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.448402] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.448461] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.448500] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
[ 1.508207] hub 4-0:1.0: USB hub found
[ 1.508218] hub 4-0:1.0: 5 ports detected
[ 1.508340] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.508362] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.508422] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.508446] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
[ 1.568220] hub 5-0:1.0: USB hub found
[ 1.568231] hub 5-0:1.0: 5 ports detected
[ 1.568351] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.568375] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.568440] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.568465] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
[ 1.628215] hub 6-0:1.0: USB hub found
[ 1.628225] hub 6-0:1.0: 2 ports detected
[ 1.628341] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.628364] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.628429] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.628454] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
[ 1.688203] hub 7-0:1.0: USB hub found
[ 1.688213] hub 7-0:1.0: 4 ports detected
[ 1.688334] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.688443] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.688447] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.688599] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.688754] mousedev: PS/2 mouse device common for all mice
[ 1.688939] rtc_cmos 00:05: RTC can wake from S4
[ 1.689052] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.689078] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.689282] device-mapper: uevent: version 1.0.3
[ 1.689429] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.689657] cpuidle: using governor ladder
[ 1.690043] cpuidle: using governor menu
[ 1.690047] EFI Variables Facility v0.08 2004-May-17
[ 1.690517] TCP cubic registered
[ 1.690774] NET: Registered protocol family 10
[ 1.691796] NET: Registered protocol family 17
[ 1.691819] Registering the dns_resolver key type
[ 1.692021] PM: Hibernation image not present or could not be loaded.
[ 1.692051] registered taskstats version 1
[ 1.722642] Magic number: 4:199:912
[ 1.722751] rtc_cmos 00:05: setting system clock to 2012-03-03 01:55:29 UTC (1330739729)
[ 1.722811] powernow-k8: Found 1 AMD FX(tm)-6100 Six-Core Processor (6 cpu cores) (version 2.20.00)
[ 1.722853] powernow-k8: Core Performance Boosting: on.
[ 1.722968] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 1.722972] powernow-k8: 1 : pstate 1 (3000 MHz)
[ 1.722976] powernow-k8: 2 : pstate 2 (2400 MHz)
[ 1.722980] powernow-k8: 3 : pstate 3 (1800 MHz)
[ 1.722984] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 1.724208] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.724214] EDD information not available.
[ 1.728420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.730481] Freeing unused kernel memory: 988k freed
[ 1.730825] Write protecting the kernel read-only data: 12288k
[ 1.751774] Freeing unused kernel memory: 2036k freed
[ 1.767230] Freeing unused kernel memory: 1388k freed
[ 1.796887] udevd[95]: starting version 173
[ 1.812414] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.812440] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.812443] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.812544] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 1.812639] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfd7f8000
[ 1.812655] xhci_hcd 0000:02:00.0: Failed to enable MSI-X
[ 1.812693] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 1.812753] ahci 0000:00:11.0: version 3.0
[ 1.812777] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.812863] xHCI xhci_add_endpoint called for root hub
[ 1.812865] xHCI xhci_check_bandwidth called for root hub
[ 1.812870] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.812877] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.812913] hub 8-0:1.0: USB hub found
[ 1.812922] hub 8-0:1.0: 2 ports detected
[ 1.812982] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.813015] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 1.813160] xHCI xhci_add_endpoint called for root hub
[ 1.813162] xHCI xhci_check_bandwidth called for root hub
[ 1.813197] hub 9-0:1.0: USB hub found
[ 1.813203] hub 9-0:1.0: 2 ports detected
[ 1.813762] scsi0 : ahci
[ 1.815420] scsi1 : ahci
[ 1.815567] scsi2 : ahci
[ 1.815751] scsi3 : ahci
[ 1.815911] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[ 1.815915] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[ 1.815919] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[ 1.815923] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[ 1.816357] r8168 Gigabit Ethernet driver 8.028.00-NAPI loaded
[ 1.816381] r8168 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.816399] r8168 0000:03:00.0: setting latency timer to 64
[ 1.816451] r8168 0000:03:00.0: irq 41 for MSI/MSI-X
[ 1.816730] eth%d: RTL8168E-VL/8111E-VL at 0xffffc90000c7e000, 50:e5:49:c4:4e:6d, IRQ 41
[ 1.904044] usb 5-5: new low speed USB device number 2 using ohci_hcd
[ 1.959960] scsi4 : pata_atiixp
[ 1.960048] scsi5 : pata_atiixp
[ 1.960731] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.960734] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.982667] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
[ 1.982671] eth0: Identified chip type is 'RTL8168E-VL/8111E-VL'.
[ 1.982674] r8168 Copyright (C) 2011 Realtek NIC software team
[ 1.982675] This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
[ 1.982677] This is free software, and you are welcome to redistribute it under certain conditions; see .
[ 2.112043] Refined TSC clocksource calibration: 3322.235 MHz.
[ 2.112052] Switching to clocksource tsc
[ 2.132040] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.140067] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.196039] usb 8-1: new high speed USB device number 2 using xhci_hcd
[ 2.213906] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.214660] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.215408] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.216159] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.221944] usbcore: registered new interface driver uas
[ 2.312047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.312078] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.314160] ata2.00: HPA detected: current 490232639, native 490234752
[ 2.314170] ata2.00: ATA-7: Maxtor 7L250S0, BANC1G10, max UDMA/133
[ 2.314176] ata2.00: 490232639 sectors, multi 0: LBA48 NCQ (not used)
[ 2.317194] ata2.00: configured for UDMA/133
[ 2.318434] ata1.00: HPA detected: current 976771055, native 976773168
[ 2.318505] ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
[ 2.318511] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.325016] ata1.00: configured for UDMA/133
[ 2.325214] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0 PQ: 0 ANSI: 5
[ 2.325543] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.325588] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 2.325700] sd 0:0:0:0: [sda] Write Protect is off
[ 2.325708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.325746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.325870] scsi 1:0:0:0: Direct-Access ATA Maxtor 7L250S0 BANC PQ: 0 ANSI: 5
[ 2.326105] sd 1:0:0:0: [sdb] 490232639 512-byte logical blocks: (250 GB/233 GiB)
[ 2.326120] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.326237] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.326245] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.326298] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.350476] sdb: sdb1 sdb4
[ 2.351030] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.363608] sda: sda1 sda2 sda3 < sda5 > sda4
[ 2.364220] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.367928] Initializing USB Mass Storage driver...
[ 2.368343] scsi6 : usb-storage 8-1:1.0
[ 2.369112] usbcore: registered new interface driver usb-storage
[ 2.369119] USB Mass Storage support registered.
[ 2.373121] input: USB Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input3
[ 2.373396] generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:13.0-5/input0
[ 2.373516] usbcore: registered new interface driver usbhid
[ 2.373521] usbhid: USB HID core driver
[ 2.816653] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.368691] scsi 6:0:0:0: Direct-Access ADATA USB Flash Drive 0.00 PQ: 0 ANSI: 2
[ 3.744332] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.744505] sd 6:0:0:0: [sdc] 15806464 512-byte logical blocks: (8.09 GB/7.53 GiB)
[ 3.744664] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.744670] sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 3.744815] sd 6:0:0:0: [sdc] Asking for cache data failed
[ 3.744820] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.745698] sd 6:0:0:0: [sdc] Asking for cache data failed
[ 3.745704] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.746484] sdc: sdc1
[ 3.757945] sd 6:0:0:0: [sdc] Asking for cache data failed
[ 3.757952] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.757958] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 17.191753] udevd[338]: starting version 173
[ 17.221466] lp: driver loaded but no devices found
[ 17.226052] it87: Found IT8720F chip at 0x228, revision 8
[ 17.226060] it87: VID is disabled (pins used for GPIO)
[ 17.226071] it87: Routing internal VCCH to in7
[ 17.226076] it87: Beeping is supported
[ 17.229961] wmi: Mapper loaded
[ 17.259798] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 17.260291] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 17.260387] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 17.260468] nvidia: module license 'NVIDIA' taints kernel.
[ 17.260471] Disabling lock debugging due to kernel taint
[ 17.264203] Adding 7811068k swap on /dev/sda5. Priority:-1 extents:1 across:7811068k
[ 17.266409] Linux video capture interface: v2.00
[ 17.270271] IR NEC protocol handler initialized
[ 17.272676] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 17.272732] saa7134 0000:04:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 17.272738] saa7133[0]: found at 0000:04:06.0, rev: 209, irq: 20, latency: 32, mmio: 0xfddff000
[ 17.272745] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=137,autodetected]
[ 17.272765] saa7133[0]: board init: gpio is 2fe00
[ 17.279165] IR RC5(x) protocol handler initialized
[ 17.283706] IR RC6 protocol handler initialized
[ 17.284745] MCE: In-kernel MCE decoding enabled.
[ 17.285494] EDAC MC: Ver: 2.1.0
[ 17.285991] AMD64 EDAC driver v3.4.0
[ 17.286010] EDAC amd64: DRAM ECC disabled.
[ 17.286020] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 17.286021] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 17.286023] (Note that use of the override may cause unknown side effects.)
[ 17.289425] IR JVC protocol handler initialized
[ 17.291131] IR Sony protocol handler initialized
[ 17.293944] lirc_dev: IR Remote Control driver registered, major 250
[ 17.294264] IR LIRC bridge handler initialized
[ 17.314078] type=1400 audit(1330736145.086:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
[ 17.314457] type=1400 audit(1330736145.086:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=557 comm="apparmor_parser"
[ 17.314593] type=1400 audit(1330736145.086:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
[ 17.314883] type=1400 audit(1330736145.086:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[ 17.314922] type=1400 audit(1330736145.086:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
[ 17.315083] type=1400 audit(1330736145.086:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
[ 17.320279] Registered IR keymap rc-avermedia-a16d
[ 17.320375] input: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:14.4/0000:04:06.0/rc/rc0/input4
[ 17.320432] rc0: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:14.4/0000:04:06.0/rc/rc0
[ 17.358692] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.472017] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.472028] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 17.472036] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff
[ 17.472043] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472050] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[ 17.472057] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472063] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472070] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472077] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472084] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472094] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472116] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472127] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472137] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472147] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.472157] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 17.473516] i2c-core: driver [tuner] using legacy suspend method
[ 17.473520] i2c-core: driver [tuner] using legacy resume method
[ 17.480049] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 17.481269] xc2028 1-0061: creating new instance
[ 17.481272] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 17.511722] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 17.524027] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 17.657704] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.657711] nvidia 0000:01:00.0: setting latency timer to 64
[ 17.657720] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.657842] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011
[ 19.493985] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 19.708782] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 20.499711] type=1400 audit(1330736148.270:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=948 comm="apparmor_parser"
[ 20.501578] type=1400 audit(1330736148.274:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=952 comm="apparmor_parser"
[ 20.502161] type=1400 audit(1330736148.274:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=949 comm="apparmor_parser"
[ 20.502791] type=1400 audit(1330736148.274:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=952 comm="apparmor_parser"
[ 20.592071] init: failsafe main process (912) killed by TERM signal
[ 20.592493] init: apport pre-start process (1019) terminated with status 1
[ 20.596307] init: apport post-stop process (1049) terminated with status 1
[ 20.682486] r8168: eth0: link down
[ 20.683204] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.383848] Bluetooth: Core ver 2.16
[ 21.383870] NET: Registered protocol family 31
[ 21.383873] Bluetooth: HCI device and connection manager initialized
[ 21.383876] Bluetooth: HCI socket layer initialized
[ 21.383877] Bluetooth: L2CAP socket layer initialized
[ 21.383918] Bluetooth: SCO socket layer initialized
[ 21.385461] Bluetooth: RFCOMM TTY layer initialized
[ 21.385468] Bluetooth: RFCOMM socket layer initialized
[ 21.385470] Bluetooth: RFCOMM ver 1.11
[ 21.386560] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.386563] Bluetooth: BNEP filters: protocol multicast
[ 22.318521] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 22.328485] r8168: eth0: link up
[ 22.330002] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.414591] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 22.680957] r8168: eth0: link up
[ 26.208018] (0), id 00000000000000ff:
[ 26.208021] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[ 26.376017] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[ 26.728147] saa7133[0]: registered device video0 [v4l2]
[ 26.728232] saa7133[0]: registered device vbi0
[ 26.728308] saa7133[0]: registered device radio0
[ 26.733824] saa7134 ALSA driver for DMA sound loaded
[ 26.733881] saa7133[0]/alsa: saa7133[0] at 0xfddff000 irq 20 registered as card -2
[ 26.735032] dvb_init() allocating 1 frontend
[ 26.744047] xc2028 1-0061: attaching existing instance
[ 26.744056] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 26.744062] DVB: registering new adapter (saa7133[0])
[ 26.744070] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[ 26.756029] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 33.168054] eth0: no IPv6 routers present
[ 35.388034] (0), id 00000000000000ff:
[ 35.388041] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[ 35.556031] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[ 35.916044] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 44.252034] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000.
[ 44.564194] xc2028 1-0061: Error on line 1200: -5
[ 44.564366] xc2028 1-0061: Error on line 1200: -5
[ 44.564538] xc2028 1-0061: Error on line 1200: -5
[ 44.641935] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 44.641942] vesafb: scrolling: redraw
[ 44.641948] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 44.641962] mtrr: type mismatch for d8000000,800000 old: write-back new: write-combining
[ 44.641971] mtrr: type mismatch for d8000000,400000 old: write-back new: write-combining
[ 44.641979] mtrr: type mismatch for d8000000,200000 old: write-back new: write-combining
[ 44.641987] mtrr: type mismatch for d8000000,100000 old: write-back new: write-combining
[ 44.641997] mtrr: type mismatch for d8000000,80000 old: write-back new: write-combining
[ 44.642007] mtrr: type mismatch for d8000000,40000 old: write-back new: write-combining
[ 44.642016] mtrr: type mismatch for d8000000,20000 old: write-back new: write-combining
[ 44.642024] mtrr: type mismatch for d8000000,10000 old: write-back new: write-combining
[ 44.642032] mtrr: type mismatch for d8000000,8000 old: write-back new: write-combining
[ 44.642039] mtrr: type mismatch for d8000000,4000 old: write-back new: write-combining
[ 44.642047] mtrr: type mismatch for d8000000,2000 old: write-back new: write-combining
[ 44.642056] mtrr: type mismatch for d8000000,1000 old: write-back new: write-combining
[ 44.643731] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc90011b00000, using 5120k, total 5120k
[ 44.644105] Console: switching to colour frame buffer device 160x64
[ 44.644167] fb0: VESA VGA frame buffer device
[ 44.664534] init: plymouth-splash main process (1486) terminated with status 1
[ 44.669585] init: kdm main process (1485) killed by TERM signal
[ 44.669723] ppdev: user-space parallel port driver
[ 44.687202] audit_printk_skb: 30 callbacks suppressed
[ 44.687213] type=1400 audit(1330736172.460:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1509 comm="apparmor_parser"
[ 44.688720] type=1400 audit(1330736172.464:23): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1509 comm="apparmor_parser"
[ 47.928994] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 48.129957] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 237.988050] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 246.516042] xc2028 1-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000.
[ 246.676037] xc2028 1-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
[46084.958638] software-center[4687]: segfault at 8 ip 00000000004dbe28 sp 00007fff2fda49e0 error 4 in python2.7[400000+233000]
[47416.976058] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[47425.512107] (0), id 00000000000000ff:
[47425.512119] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[47425.680062] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[47425.908048] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[47434.444049] (0), id 00000000000000ff:
[47434.444055] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[47434.612052] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[47435.188073] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[47443.724043] (0), id 00000000000000ff:
[47443.724048] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[47443.892088] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[47444.156050] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[47452.684082] (0), id 00000000000000ff:
[47452.684088] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[47452.852055] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.